Loading...

PREMIUM*** Dry cutting saw blades

DCU*** 4in1 | in TGD®-Technology

Materials able to be machined: universal building materials, such as concrete, natural stone, clay brick, cellular concrete, etc. The DCU***4in1 dry cutting saw blade impresses with excellent results when cutting concrete, hard stone, abrasive materials and steel. The possibility for universal use offers the user a product which is ready-to-use at any time without a wheel change and ensures the successful completion of a project. Show more Show less

  • Low cutting costs
  • Reduced load for the user
  • Universal use
  • Consistently fast cutting performance, very long lifetime and noticeable smooth running

PREMIUM*** Dry cutting saw blades

DCU***

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Very easy cutting
  • Broad product range

PREMIUM*** Dry cutting saw blades

DCU***-FC 4in1

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Very easy cutting
  • Broad product range

PREMIUM*** Dry cutting saw blades

DCU***-S | in Silent design

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Silent design
  • Broad product range

STANDARD** Dry cutting saw blades

DCU**

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Impressive performance and lifetime

STANDARD** Dry cutting saw blades

DCU**-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Impressive performance and lifetime

BASIC* Dry cutting saw blades

DCU*

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Universal use
  • Cost-effective performance and lifetime

BASIC* Dry cutting saw blades

DCU*-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Universal use
  • Cost-effective performance and lifetime

PREMIUM*** Dry cutting saw blades

DCC***

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Very easy cutting
  • Broad product range
  • Maximum performance and lifetime

PREMIUM*** Dry cutting saw blades

DCC***-FC Wall chaser blade

Materials able to be machined: Concrete, clay brick, cellular concrete. Details: tool for the milling of slots in concrete and masonry. For use with all common wall chasers.

  • Broad product range
  • Maximum performance and lifetime
  • Maximum performance and lifetime

STANDARD** Dry cutting saw blades

DCC**

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Impressive performance and lifetime
  • Reliable quality

PREMIUM*** Dry cutting saw blades

DCH*** | in TGD®-technology

Materials able to be machined: Concrete blocks, granite, gneiss, porphyry, paving slab, etc. Details: the DCH*** dry cutting saw blade, specially developed using TGD®-technology for hard stone, impresses with its cutting ability and smooth running. Reduced effort over the entire lifetime allows for higher productivity. The perfectly optimised segments for the application create very clean, chip-free edges and ensure a flawless result. Show more Show less

  • Low cutting costs
  • Reduced load for the user
  • No reworking
  • Consistently fast cutting performance, very long lifetime and noticeable smooth running

PREMIUM*** Dry cutting saw blades

DCH***

Materials able to be machined: Granite, gneiss, porphyry, paving slab, hard limestone, etc.

  • Maximum performance and lifetime
  • Broad product range

PREMIUM*** Dry cutting saw blades

DCH***-FC

The DCH***-FC from TYROLIT enables the user to carry out cutting work swiftly and to precise dimensions, without any great exertion. The DCH***-FC is an ultra-thin diamond cut-off wheel with a segment thickness of 1.2 or 1.9 mm. It is distinguished by an extremely high cutting ability with minimal dust generation and extremely smooth running.

  • Extremely high stock removal rate
  • Minimal effort
  • Health benefits
  • Very clean, chip-free cutting edges

BASIC* Dry cutting saw blades

DCH*

Materials able to be machined: Granite, porphyry, paving slab, hard limestone, etc.

  • Cost-effective performance and lifetime
  • High quality
  • Efficient

PREMIUM*** Dry cutting saw blades

DCAB***

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

  • Suitable for abrasive materials
  • From a diameter of 230 mm upwards with inclined protective segments to guard against segment loss
  • Maximum performance and lifetime

PREMIUM*** Dry cutting saw blades

DCAB*** Tuck point blade

Materials able to be machined: mortar joints. Details: tool for milling and repairing mortar joints.

  • Suitable for abrasive materials
  • Maximum performance and lifetime
  • Broad product range

BASIC* Dry cutting saw blades

DCAB*

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

  • Suitable for abrasive materials
  • Cost-effective performance and lifetime
  • Efficient

PREMIUM*** Dry cutting saw blades

DCM***

Materials able to be machined: marble, fibreglass reinforced plastic, PVC, carbon fibre, composites, fibreglass, bulletproof glass, etc. Details: with electroplated coating, also suitable for rescue operations.

  • Universal use for marble, fibreglass reinforced plastic, PVC, carbon fibre, composites
  • Also suitable for rescue operations

PREMIUM*** Dry cutting saw blades

DCT***

Materials able to be machined: Ceramic tile, fine stoneware, porcelain. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Chip-free cutting edges
  • Very easy cutting
  • Maximum performance and lifetime

BASIC* Dry cutting saw blades

DCT*

Materials able to be machined: Ceramic tiles.

  • Chip-free cutting edges
  • Cost-effective performance and lifetime
  • Efficient

PREMIUM*** Roofer's cutting wheel

The TYROLIT roofer's cutting wheel was specially developed for the wide-ranging roofing application scenarios and is suitable for cutting all common roofing materials – from concrete and clay roof tiles through to fibre cement. The ribbed cutting rim and the hardened steel core ensure minimum cutting pressures and clean straight cuts throughout the wheel life.

  • Universal use
  • Overheating-free
  • Ribbed cutting rim
  • Ensures straight cuts

PREMIUM*** FOCUR SA

Diamond cut-off wheel for grey and spheroidal cast iron for slowly rotating machines

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cutting discs are specially designed for slow-rotating machines and are only available in diameters of 350 mm.

PREMIUM*** Cutting and chamfering disc

DCCI*** Combi

The new cutting and chamfering disc DCCI*** Combi has been especially developed for the treatment of plastic pipes. The galvanized cutting edge and the diamond-coated chamfering enable a constant and clean cutting and chamfering at the same time. A cutting depth stop serves as an additional aid.