Thanks to the self-sharpening ceramic abrasive grain, the PREMIUM*** CERAMIC flap disc is particularly suitable for stainless steels and demanding grinding applications. The additional TOP SIZE coating ensures cool grinding, allowing a longer tool lifetime and reducing discolouration on the workpiece surface. Thanks to the self-sharpening characteristic of the abrasive grain, a more even surface quality is achieved over the entire lifetime of the disc. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
The PREMIUM*** 2in1 flap disc combines an excellent lifetime with very high specific abrasion. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
The DME19DP in conjunction with TYROLIT TGD®-Technology dry drill bits is the solution for dry drilling applications in reinforced concrete. The practical centring aid ensures precise drill bit guidance and a longer diamond tool lifetime. Switchable soft impact function accelarates work progress, particularly in hard materials. The soft start and the LED indicator aid the user in selecting the optimal drilling speed. Show more Show less
Downloads |
---|
Product flyer PDF 202 kb |
Manual PDF 382 kb |
These tungsten carbide burrs have been specially developed for use on stainless steel and produced on the most modern CNC grinding machines. The newly developed geometry enables cool grinding with the longest tool lifetimes on hand-operated, pneumatic and electric machines. The abrasive cutter profile is especially long-chipping and ensures a high stock removal volume. A reduced generation of heat protects the milling cutter and the workpiece. Show more Show less
Wire brushes are ideal for finishing particularly hard-to-reach parts. With this product, you obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning and also for removing burr, rust, rubber and other impurities in hard-to-reach areas. Show more Show less
The combination of ceramic grains and our unique TYROLIT bonding system guarantees continuous aggressiveness with an unmatchable lifetime. CERABOND X stays sharp, making it the best solution for grinding steel and stainless steel in heavy-duty applications. Whether you’re edge grinding, surface grinding or removing welding seams, CERABOND X will get the job done faster. Show more Show less
The product line MIRA ALPHA has been specially developed for continuous generating grinding of gears. It is a product update to the product line MIRA ICE. With the new ALPHA technology from TYROLIT previously unattained results in terms of economy and cool grinding can be achieved. Show more Show less
Downloads |
---|
Product flyer PDF 227 kb |
TYROLIT has developed the MIRA Ultra product line specifically for the continuous generating grinding of gears. All specifications are produced without the addition of sintered aluminium oxide and combine outstanding performance data with optimum economic efficiency. The innovative grinding wheel structure was specially designed for operating speeds of up to 100 m/s and allows reliable operation on modern high-speed machines.
Downloads |
---|
Product flyer PDF 248 kb |
The PREMIUM*** LONGLIFE is a high-performance flap disc for steel and boasts an excellent stock removal rate and the longest lifetime. A stock removal rate of more than 4000g opens up a completely new dimension. A natural fibre core gives the tool additional flexibility, meaning that the PREMIUM*** LONGLIFE fits the workpiece surface perfectly and creates clean grinding transitions. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
The PREMIUM*** LONGLIFE is a high-performance rough grinding wheel for surface and edge grinding. It is distinguished by its excellent lifetime. The 7, 8 and 10 mm thick LONGLIFE rough grinding wheels also provide enhanced dimensional stability during welding. The 4 mm thick LONGLIFE rough grinding wheel has been especially developed for use in pipeline construction and for fillet welding. Show more Show less
This rough grinding wheel is particularly suitable for steel and stainless steel applications. Due to its softer design, the PREMIUM*** 2in1 is quick and convenient to use and requires minimal effort. This is made possible by a new bond with coarser grain and a new layer composition. What makes our 2in1 rough grinding wheel so unique is the bevelled and defined edge of the tool. With the "Comfort Start" edge, the user can achieve a pleasant start to grinding and the level of comfort while working is increased many times over. Show more Show less
Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel for steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less
The PREMIUM*** resin mounted points have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on stainless steel. Due to their bond, they are specially suited to INOX materials. Maximum operating speed: 50 m/s Show more Show less
With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. Show more Show less
Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Wire brushes with plastic achieve a longer lifetime. Show more Show less
Round brushes for floorstanding grinders. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less
The DME22SU drill motor is ideal for electrical and installation work. It features a 3-speed transmission and variable speed setting with soft start. Integrated overload cut-outs and the PRCD safety switch ensure safe working. Dry drilling is also possible with the included M16 adapter. Show more Show less
Downloads |
---|
Product flyer PDF 161 kb |
Manual PDF 1.15 mb |
The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry of the Rondeller® enables cool, ergonomic grinding that is kind to materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding, deburring and shaping applications means that curved surfaces can be perfectly machined. Show more Show less
The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less
Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
The quality of the PREMIUM*** cut-off wheel ensures the longest lifetime and cost-effective operation. By using the grit size 100, a particularly low burr result is achieved. The cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less
TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the PREMIUM*** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. These include the PREMIUM*** cut-off wheel for steel in diameters from 300 to 500 mm. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less
With the PREMIUM*** CONDITIONING wheel you can remove all rough scratch marks from the surface before commencing the polishing process. The three-dimensional flap design reduces clogging of the wheel to a minimum. Using the wheel also prevents discolouration on the workpiece caused by high heat build-up. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less
The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working. This tool can be used on both steel and stainless steel. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less
The Premium*** belts have been specially designed for the mini belt grinder and prevent grain break outs on the tool due to their special curvature. A good stock removal rate and long lifetime allow consistent results to be delivered in shorter working hours. Our belts are easy to handle and mount. TYROLIT mini belts can be used on all steel, stainless steel and nonferrous metals. Show more Show less
The special feature of the PREMIUM*** paper sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less
TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. A unique, strong paper backing combined with zirconium makes this product extremely abrasive and durable, and active coolants enable cool, clean grinding to be performed on the workpiece. Thanks to the thin fibre backing with grit 40 and strong paper backing the TFC is the optimal tool for removing smaller welding and spot weld seams. Show more Show less
With TYROLIT QUICK CHANGE DISCS you can save time and thus increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. These QUICK CHANGE DISCS are specially designed for general grinding tasks on steel. Our two different types cover the main mounting systems. Show more Show less
PREMIUM*** rollers for bench grinders can be used for general grinding processes, including cleaning, finishing and for polishing uneven or curved surfaces. As the wear pattern remains stable throughout the product lifetime, a consistent high-quality surface finish is delivered. The comprehensive assortment offers products for removing welding tracks, scratches and oxidation residue, as well as for pre-treating surfaces. Show more Show less
TYROLIT spiral belts are used for fine grinding and deburring work, as well as shaping complex workpieces. The combination of zirconium and an additional coolant enables them to be used on many different materials. The variety of grit sizes available means they can be used for very high stock removal or fine grinding. The spiral belts can easily be mounted on an axle or an expandable mandrel. Accessories also form part of our assortment. Show more Show less
Shaft mounted cup brushes are ideal for hard-to-reach parts. With this product, you obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less
With Hylas, TYROLIT introduces a new line of wheels for grinding furniture and technical glass. The most significant benefits are: fast startup, high speed, excellent quality finishing as well as extreme flexibility of use. HYLAS allows the same wheel to be installed on different double edging machines, regardless of the type of machine fitting, thanks to the simple use of suitable adaptors. Hylas has also been designed to never need reprofiling and thus offers the advantage of working always with a new grinding wheel.
Downloads |
---|
Product flyer PDF 273 kb |
The DME17 is a 2-speed dry drill motor for drilling diameters up to 200 mm. The powerful 2.0 kW motor, in combination with the switchable soft impact, enhances the drilling performance in reinforced concrete and in other hard materials. The machine can be both hand-held and drill-rig operated. The compact design, low weight and integrated dust extraction system makes the core drill very user-friendly. This model is unique in that it is available in three speed versions (standard, slow and quick) and thus optimally covers the most varied of customer needs. Show more Show less
Downloads |
---|
Product flyer PDF 190 kb |
Manual PDF 1.17 mb |
The 900-watt DHE32 combi drill hammer features drilling, hammer drilling, chiselling and chisel adjustment, making it the ideal all-rounder for minor chiselling work as well as setting anchors. This model is simple to use due to the quick tool change system, tool-less drill chuck removal, accelerator switch and long-term operation option. It has a highly ergonomic design combining low vibrations with high impact energy and a nonrotating additional handle. Show more Show less
Downloads |
---|
Product flyer PDF 144 kb |
Manual PDF 3.18 mb |
The PREMIUM A-P01 C X spindle-mounted flap wheels made of corundum fabric are available in different dimensions and shaft sizes. Continuous wear of the coated abrasive, as well as the constant exposure of new abrasive grit is ensured, due to the radial arrangement of the flaps. As a result, a consistently improved grinding performance is achieved. The high flexibility of the flaps ensures excellent adaptability to irregular profiles and, due to constant ventilation during the machining process, the working surface is only moderately heated. While the flap wheels with 3mm shaft are characterised by their exceptionally small dimensions, the 6mm version represents the most versatile abrasive tool from this product group. Its high durability predestines them for the most diverse applications and materials. Show more Show less
The large dimensions of the PREMIUM flap wheels ensure long lifetime, continuity in machining and reduced durations of wheel changes. They are suitable for use in hand-held machines with flexible shafts as well as on stationary polishing machines. The large diameter increases the contact area and creates a more uniformed grinding pattern compared to similar tools with smaller dimensions, which also allows their use on large surfaces. Due to the arrangement of the flaps, continuous wear of the abrasive cloth and constant exposure of new grit is ensured, while maintaining a high and consistent abrasive performance throughout the life of the tool. The flap wheels combine flexibility with excellent adaptability to irregular contours. In addition, the strong ventilation during machining prevents overheating of the work surface, which offers excellent results in a wide range of applications. The abrasive flaps made of corundum cloth are fixed radially around the axis of the tool. The bore is reinforced by a metal ring with variable dimensions depending on the wheel diameter, which allows the wheel to be securely mounted on the machine. This is facilitated by an appropriate reducing flange. Show more Show less
With the STRIP-IT rough cleaning wheel, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, enriched with an aggressive abrasive, rise to any challenge. They also prevent the wheel from becoming clogged or smeared. The wheel are provided with a centre bore in order to be mounted on the clamping mandrels provided, either individually or in pairs on a straight grinder. The red rough cleaning wheel STRIP-IT made of ceramic corundum (S EX. ROUGH) is harder, more aggressive and harder compared to the black standard version (S ROUGH). This offers the operator quiet, fatigue-free grinding with low heat generation with the disc. When using the longer mandrel, two rough cleaning wheels can also be clamped on - creating larger area of contact and faster work progress. Show more Show less
With the STRIP-IT rough cleaning wheel, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, enriched with an aggressive abrasive, rise to any challenge. They also prevent the wheel from becoming clogged or smeared. The STRIP-IT material is cut in a wheel shape and provided with a pre-assembled shaft (6 or 8mm) for quick insertion on spindles. The STRIP-IT rough cleaning wheel made of ceramic corundum (S EX. ROUGH) is harder, more aggressive and harder compared to the standard version (S ROUGH). This offers the operator quiet, fatigue-free grinding with low heat generation with the disc. Show more Show less
With the STRIP-IT rough cleaning wheel, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, enriched with an aggressive abrasive, rises to any challenge. They also prevent the wheel from becoming clogged or smeared. The rough cleaning wheels mounted on flexible fibre glass support bodies to enable use on angle grinders in combination with a supporting disc. This offers the operator quiet, fatigue-free grinding with low heat generation with the disc. Show more Show less
The perfect combination of handiness and lifetime - the composition of our PREMIUM roller made of corundum fabric ensures an excellent balance between flexibility and resistance. The grinding cylinder is available in different grit sizes to cover all fields of application: grit sizes 40-80 are designed for maximum stock removal, while the sizes 100-320 ensure a perfect surface result. The system with four wedges exerts an effective pulling effect on the grinding tool and guarantees quick start-up of the roller. Show more Show less
With the STRIP-IT rough cleaning wheel, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, enriched with an aggressive abrasive, rise to any challenge. They also prevent the wheel from becoming clogged or smeared. The STRIP-IT material is applied to a rigid fibre glass carrier specially designed for use on angle grinders. The STRIP-IT rough cleaning wheel made of ceramic corundum (S EX. ROUGH) is harder, more aggressive and firmer compared to the standard version (S ROUGH). This offers the operator quiet, fatigue-free grinding with low heat generation with the disc. Show more Show less
The rollers made of abrasive fabric with bore offer a constant result in fine machining. The material features strong ventilation, flexibility, exceptional ease of use and low noise. To prevent the rollers from clogging, they can be cleaned easily with compressed air or water. The material is available in different designs to cover any application. The system with four wedges exerts an effective pulling effect on the grinding tool and guarantees quick start-up of the roller. Show more Show less
With the PREMIUM*** CONDITIONING wheel you can remove all rough scratch marks from the surface before commencing the polishing process. The three-dimensional flap design reduces clogging of the wheel to a minimum. Using the wheel also prevents discolouration on the workpiece caused by high heat build-up. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less
The PREMIUM Quick-Change discs made of zirconium with quick-clamping system offer increased stock removal rates in applications with high grinding pressure. Zirconium is characterised by high viscosity, which leads to a clearly improved resistivity of the discs. The mechanical locking of the disc guarantees a secure attachment that cannot loosen or shift during work, enabling quick and easy disc changes. Through the strong adhesion and the high-quality abrasive grain, an excellent lifetime of the product is guaranteed. The quick-change discs are available in two different mounting options, in order to cover various tool types. Show more Show less
The PREMIUM flap wheels with threaded shaft made of corundum are ideal for robot-guided applications or in machining lines with high production rates. Continuous wear of the coated abrasive, as well as the constant exposure of new abrasive grit is ensured, due to the radial arrangement of the flaps. As a result, a consistently improved grinding performance is achieved. The high flexibility of the flaps ensures excellent adaptability to irregular profiles and, due to constant ventilation during the machining process, the working surface is only moderately heated. The product is characterised by the ability to be quickly exchanged, which facilitates the substitution of different grit sizes on the same tool. This is done by loosening the wheel manually. Show more Show less
High-performance rough grinding wheel for comfortable yet aggressive application on steel and stainless steel. Suitable for common angle grinders. The new 2in1 CERABOND X COMFORT rough grinding wheels are easy to use despite their high aggressiveness and deliver the best results. This creates the perfect combination of cutting ability and comfort. Our well-known CERABOND X technology also guarantees consistent quality over the entire lifetime of the tool. The COMFORT variant offers a fast and comfortable solution for universal application on steel and stainless steel to achieve high stock removal rates. Show more Show less
The PREMIUM*** flap disc for steel is a versatile professional tool suitable for universal grinding tasks. With this disc, users will achieve perfect surfaces on steel, as well as the best results for surface or edge grinding and deburring work. The supporting disc is made of rigid fibre glass and is therefore ideally suited to use on powerful angle grinders. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel specially designed for stainless steel is also ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less
The PREMIUM*** resin mounted points (dark brown) have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on cast iron materials. Due to their bond, they are specially suited to casting. Maximum operating speed: 50 m/s Show more Show less
With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. Show more Show less
Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less
The versatile round brushes for floorstanding grinders are used in a variety of industries. These wire brushes with knotted wire can be used to remove rust and paint, as well as for fine grinding. They also come in useful for polishing and matting stainless steel workpieces. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less
These brushes are stainless steel specialists when it comes to deburring and cleaning welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less
Efficient motor with very high drilling performance. The DME20 drill motor provides impressive drilling performance in the power range up to 2 kW. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is suitable for universal use and covers a wide variety of application areas: manual/drill-rig guided and wet/dry (DME20PU). Show more Show less
Downloads |
---|
Product flyer PDF 183 kb |
Manual PDF 1.68 mb |
The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry and stud pattern of the RONDELLER® enables ergonomic grinding that protects materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding jobs means that curved surfaces can be perfectly machined. Show more Show less
The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less
Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that has been specially developed for use on nonferrous metals. With these products you can achieve the longest lifetimes. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The PREMIUM*** cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less
This wheel has been developed specially based on specifications for cutting rails. Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the rail cut-off wheel from TYROLIT offers short cutting times coupled with minimal effort. Exceptionally clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
Downloads |
---|
Product flyer PDF 2.99 mb |
TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Despite its versatile use, the tool offers maximum cutting ability and the longest lifetime. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting or a reduction in the fatigue strength. Show more Show less
The paper sheets made of silicon carbide are the perfect product for preparing and machining metal, wood, paint and lacquer. The special feature of the PREMIUM*** sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less
TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. This durable and flexible product has been developed with a special film backing to achieve improved edge stability and stock removal rate. The product delivers an exceptionally even finish on lacquers, paints and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less
With TYROLIT QUICK CHANGE DISCS you can save a considerable amount of time. This specification delivers maximum stock removal rates at the same time as a long lifetime. This is achieved by combining the zirconium and ceramic aluminium oxide with a three-layer product structure. In addition, this product also delivers a high level of stability, low grain break-out and enhanced edge stability. Show more Show less
The patented shape of the newly developed PREMIUM*** spiral rollers means they are extremely easy and convenient to use without lateral deflection. Using the PREMIUM*** spiral rollers significantly increases productivity by avoiding typical roller imprinting on the workpiece. This means grinding processes do not have to be performed again. In addition, vibrations are considerably reduced and the load is minimised. The convenient and intuitive operation does not require extensive training to learn, meaning convincing results are achieved immediately. Show more Show less
This expandable rubber support has been specially designed for use with spiral belts. Expanding the flaps on the support enables the spiral belt to be fixed, ensuring it is safe and easy to mount. These accessories are suitable for all spiral belts in our assortment. Show more Show less
Shaft mounted round brushes are ideal for hard-to-reach parts. With this product, you obtain a tool that can be used on both straight grinders and drilling machines. Knotted wire brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Twisted shaft mounted round brushes are designed for finishing welding seams and removing scale and paint. Show more Show less
The PREMIUM*** Fastcut rough grinding wheel optimises the cutting ability and, together with its unique "Comfort-start" edge, realises the highest level of comfort plus an excellent lifetime. All of these features guarantee economical and efficient methods for the operator with regard to the comfortable machining of steel and stainless steel. You can see for yourself the performance and abrasiveness of the FASTCUT rough grinding wheel. Show more Show less
To prepare surfaces for polishing, you require a sturdy, high-quality tool. The PREMIUM*** PRE-POLISH comprises several layers of abrasive fabric to achieve a long lifetime and sturdiness. This allows the tool to be used for smaller deburring jobs as well. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less
With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime. Show more Show less
The PREMIUM SCM Heavy Duty (HD) wheels enable high grinding power with low surface roughness. This is not least due to the material composition, which consists of a ceramic-coated aluminium oxide grain, so it supports aggressive machining processes. Due to the high removal rate, several grinding processes can be reduced to one machining step. The wheels can be mounted on different supporting discs. The product is available in three versions: 1. With pre-punched centre hole, 2. With bore for clamping by means of metal ring, 3: Without bore for supporting disc with Velcro fastening system. Show more Show less
The laminated PREMIUM SCM wheels are made of the specially developed “Scrim Back” material, which is characterised by a high grain binder structure. This guarantees an excellent service lifetime. The laminated SCM wheels are also available with heavy duty material, which enables high grinding power with low surface roughness. This is not least due to the material composition, which consists of a ceramic-coated aluminium oxide grain, so it supports aggressive machining processes. Due to their reinforced construction, these wheels are particularly durable and ideally suited for demanding applications. The lamination ensures high rigidity of the wheel, so very flat and even machining of various surfaces is guaranteed. Show more Show less
This PREMIUM grinding cylinder consists of a mixture of coated abrasive and fleece, mounted on the burnishing machine through a special wedge bore. This combination of material offers easier cutting compared to rollers made of fleece only, ensuring fine machining and the highest level of operating comfort. In addition, the roller offers the typical properties of non-woven products, such as strong ventilation and low noise development during application. The system with four wedges exerts an effective pulling effect on the grinding tool and guarantees quick start-up of the roller. Show more Show less
The waved roller is composed of several strongly corrugated non-woven abrasive strips wound around a plastic core (19mm bore). The wavelike arrangement of the corundum abrasive fabric is excellently suited for seamless dash-dot matting of surfaces and guarantees consistently cool surface grinding. Show more Show less
The PREMIUM SCM grinding cylinders for satin finishing machines are to be used with the expansion roller provided for this purpose. Thanks to this product, a flawless finish is achieved on a wide variety of surfaces and workpieces. With the generous grinding surface, a fast and powerful effect is achieved on many materials. Show more Show less
The PREMIUM SCM discs are made of the specially developed “Scrim Back” material, which is characterised by a high grain binder structure. This guarantees long tool lifetime and uniformly machined surfaces. The wheels can be mounted on different supporting discs. The product is available in three versions: 1. With pre-punched centre hole, 2. With bore for clamping by means of metal ring, 3: Without bore for supporting disc with Velcro fastening system. The material is available in three aluminium oxide designs for different applications: coarse (brown), medium (red) and very fine (blue) Show more Show less
The PREMIUM Quick-Change discs made of zirconium high performance material with quick clamping system offer increased stock removal rates in applications with high grinding pressure. By using an additional coating, the stock removal process is supported without heating the processed surface and preventing clogging of the wheel. This makes the product perfectly suited for processing stainless steel, as the additional layer has a cooling effect and thus prevents discolorations on the workpiece. Zirconium is characterised by high viscosity, which leads to a clearly improved resistivity of the discs. Through the strong adhesion and the high-quality abrasive grain, an excellent lifetime of the product is guaranteed. The quick-change discs are available in two different mounting options, in order to cover various tool types. Show more Show less
The MIRA SF product line has been specifically developed for superfinishing (SF) gears during continuous generating grinding. The worm grinding wheel is designed as a 2-zone tool with a vitrified bonded zone and a resin bonded zone. The vitrified zone is used for pre-grinding and finish grinding, while the resin zone is used for superfinishing. This innovative tool design meets the high surface requirements of the automotive and transmission industries for polished surfaces on tooth flanks. Show more Show less
Downloads |
---|
Product flyer PDF 913 kb |
With TYROLIT QUICK CHANGE DISCS you can save a considerable amount of time. This specification delivers maximum stock removal rates at the same time as a long lifetime. This is achieved by combining the zirconium and ceramic aluminium oxide with a three-layer product structure. In addition, this product also delivers a high level of stability, low grain break-out and enhanced edge stability. Show more Show less
HPC tungsten carbide burrs are produced on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum grinding results. The newly developed geometry of the cutting edges ensures the longest possible lifetime and the best results on all types of steel. Plus, the tungsten carbide burrs are equipped with a state-of-the-art coating that not only makes them even stronger, but also creates a smoother surface. This improves chip transport considerably. Our combination of new, unique geometry and state-of-the-art coating technology creates unrivaled productivity, with the stock removal rate doubled compared to other premium tungsten carbide burrs. Even the unparalleled colour combination of the coating is unique to TYROLIT. Show more Show less
HPC tungsten carbide burrs are produced on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum grinding results. The newly developed geometry of the cutting edges ensures the longest possible lifetime and the best results on all types of steel. Plus, the tungsten carbide burrs are equipped with a state-of-the-art coating that not only makes them even stronger, but also creates a smoother surface. This improves chip transport considerably. Our combination of new, unique geometry and state-of-the-art coating technology creates unrivaled productivity, with the stock removal rate doubled compared to other premium tungsten carbide burrs. Even the unparalleled colour combination of the coating is unique to TYROLIT. Show more Show less
The PREMIUM quick-change discs with ceramic grit and additional abrasive surface layer offer maximum removal in applications with high grinding pressure. By using an additional coating, the stock removal process is supported without heating the processed surface and clogging of the wheel is prevented. This makes the product perfectly suited for processing stainless steel, as the additional layer has a cooling effect and thus prevents discolorations on the workpiece. The ceramic grit has a high cutting ability, is more aggressive and allows for faster stock removal rates compared to the zirconium version. Through the strong adhesion and the high-quality abrasive grain, an excellent lifetime of the product is guaranteed. The quick-change discs are available in two different mounting options, in order to cover various tool types. Show more Show less
Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less
In foundries and mould making, using ceramic mounted points is often the only method of achieving improved surface results on hard-to-reach parts. TYROLIT PREMIUM*** mounted points offer the highest possible lifetime even for hardened steels. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 50 m/s Show more Show less
Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less
The versatile round brushes for floorstanding grinders are used in a variety of industries. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Round brushes with aluminium oxide are somewhat softer and therefore less abrasive. They are primarily used in wood structuring, but also for light deburring if very small rounded edges are desired. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less
TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less
The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for nonferrous metals and is ideal for adding flutes and notches, as well as deburring gears. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less
The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
These accessories enable cut-off wheels with small diameters to be clamped onto straight grinders. Easy handling and the highest possible levels of safety are guaranteed for the operator. Please observe the maximum permissible speed.
Compared to conventional felt wheels, this product uses highly flexible flaps for optimum heat distribution and cool grinding. In doing so, the PREMIUM*** POLISH avoids undesired discolouration. Used in combination with the TYROLIT grinding paste, a perfect mirror finish is achieved on your workpiece. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less
The BASIC* belts for the portable belt grinder can be used universally, but are most commonly used on wood. They are suited to this use as they comprise aluminium oxide and polycotton backing. A special grain coating prevents loading of the belts when grinding soft materials, such as wood and paints. This delivers a good grinding power and long lifetime. Simple handling and mounting save extra working time. Show more Show less
The STANDARD** Minidisc was specially developed for machining and refining difficult to access places. Every disc is fitted with a quick fixing system which enables fast and convenient tool changes. The MINIDISC is also a 2in1 rough grinding wheel and is therefore equally suitable for steel and stainless steel. Show more Show less
With the TYROLIT rough cleaning roller for burnishing machines, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. Particularly suitable for cleaning large, even surfaces. At the same time, they prevent clogging or loading. Show more Show less
The PREMIUM*** laboratory cut-off wheel is a high-performance cut-off wheel for ferrous metals such as steel and stainless steel. It is used for cutting laboratory samples that have to be cut quickly and without structural alterations, workpiece deformations or cracks. Assembly is usually carried out on wet cutting systems with a manual or automatic feed, at a maximum operating speed of 50 m/s. The workpiece must be fixed during machining and the wheel must not be exposed to lateral load. Laboratory cut-off wheels are available in various specifications: soft for 60.5-72.3 HRC, medium for 22.0-60.5 HRC, hard for less than 22.0 HRC Show more Show less
Thanks to its new design, the PREMIUM*** LONGLIFE C-TRIM ensures an excellent stock removal rate and consistent results with 100% use of the disc thanks to the trimming option. You will attain unbeatable value in terms of lifetime. The LONGLIFE C-TRIM can be used on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding, and edge and surface grinding, particularly when used on powerful angle grinders. Thanks to its compact design, a long lifetime is guaranteed during deburring of sharp edges on thin metal sheets. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
The MIRA ICE product line has been specially developed for the continuous generating grinding of gears. A new kind of development approach enables unprecedented results to be achieved in terms of economic efficiency and cool grinding.
The combination of high-quality ceramic grain and our unique bond system guarantees lasting aggressiveness, as well as untouchable durability. Our CERABOND X natural fibre disc now delivers even greater cutting ability and sharpness at a balanced price. Due to the extremely robust structure, made up of several layers, no additional supporting disc is required and the product is able to withstand high loads long term. The core is trimmable so it offers a durable and, above all, environmentally friendly solution for demanding grinding jobs. The natural fibre disc is the best choice for fast and comfortable work on steel and stainless steel. With CERABOND X, you get to your goal faster - both when surface grinding and removing welding seams, as well as when removing rust or deburring. Show more Show less
The highly flexible flaps are arranged on a glass fibre disc, which guarantees optimum heat distribution and cool grinding. Unwanted discolouration is prevented by the PREMIUM POLISH felt discs. In combination with the PREMIUM polishing paste, the perfect mirror finish can be achieved. Show more Show less
This rough cleaning roller, for mounting on burnishing machines, consists of STRIP-IT fins which are mounted radially around a central core. The generous dimensions allow large surfaces to be worked quickly and effectively. With this product you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, enriched with an aggressive abrasive, rise to any challenge. At the same time, they also prevent smearing or clogging of the abrasive. The system with four wedges exerts an effective pulling effect on the grinding tool and guarantees quick start-up of the roller. Show more Show less
Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scale and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used for cleaning welding seams. Show more Show less
More than 25 years of experience in hard fine finishing of gears make TYROLIT the market and technology leader in this field. TYROLIT extends the MIRA product assortment for hard fine finishing of gears with the MIRA DDS dressing tools, for dressing in continous generating gear grinding. MIRA DDS dressing tools guarantee best gear qualities and a reproducible work result. Show more Show less
Downloads |
---|
Product flyer PDF 264 kb |
TYROLIT's MIRA DDG has made the company into a market and technology leader in the field of diamond dressing gear production. Honing rings are trued and sharpened during the dressing process. Thanks to their high level of reproducibility and cutting ability, MIRA DDG dressing gears guarantee optimum dressing results, the best possible gearing and surface quality as well as long tool lifetime.
Downloads |
---|
Product flyer PDF 223 kb |
The PREMIUM*** LONGLIFE flap disc offers the longest lifetime and an excellent stock removal rate. This flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The STANDARD** cup wheel for steel and cast steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less
Tool steels display exceptional hardness and strength depending on their intended purpose. The PREMIUM*** mounted points for HSS offer the best prerequisites for machining workpieces up to the lowest tolerance ranges. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 35 m/s Show more Show less
Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
Thanks to optimum torque adjustment, the DME33 is an extremely powerful drill motor providing impressive productivity. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. Show more Show less
The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for cast iron and is ideal for adding flutes and notches. In addition, the wheel makes light work of rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less
The PREMIUM*** tungsten carbide burr set contains common burrs for nonferrous metal applications. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the STANDARD** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
With the TYROLIT PREMIUM*** polishing paste in different specifications you will achieve the final mirror finish. They can be used to perform precision machining work depending on the desired surface finish. Polishing pastes are available in three specifications. Using the POLISH (white), you will achieve a perfectly smooth finish. A achieve a high-gloss finish we recommend S-POLISH (blue) while the POLISH-NE paste is perfect for nonferrous metals. Show more Show less
With a large distance between the disc and machine, you can machine even surfaces at a low grinding angle. Use our PREMIUM*** JUTE disc accessories to achieve this. The accessories are compatible with all disc diameters.
Due to the hard zirconium used in these PREMIUM*** belts they are ideal for very high pressure and deliver above-average stock removal rates. Active coolants reduce the generation of heat while grinding. This high-performance product equipped with durable polyester backing has been developed for demanding steel and stainless steel applications. These products are mainly used for dry applications. Show more Show less
TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. The thin paper backing makes the disc ideal for finishing tasks. The product delivers an exceptionally even finish on metals, lacquers, composites, marble and stone. The product delivers an exceptionally even finish on hard stone, steel and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less
For us, the STANDARD** SOFTJOB Q-Disc represents maximum flexibility for machining difficult to access areas. It has a broad application area, comprising: Surface preparation and improvement, preparation of welding work and cleaning of weld seams, processing of contours and profiled surfaces, processing of handrails and pipes, cleaning of surfaces, removal of rust and paint residues. Show more Show less
We are now taking a further step towards economic efficiency with our TYROLIT SCM range. Workpiece machining can be substantially reduced through using it. Savings of 1 to 3 working steps are also possible. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces, and the cleaning and removal of welding seams can be realised. The SCM set includes three SCM and three SCM XC discs in the designs COARSE, MEDIUM and VERY FINE as well as a back up pad. The intelligent design of our SCM discs enables them to be used on all the pack up pads available in our assortment. The removable centre hole of the SCM disc enables the disc to be fitted to the pack up pad in a self-centring position. Show more Show less
At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less
Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
The new dust extraction systems VCE1200D, VCE2400D and VCE3600D are specially optimised for floor grinding, but are also excellent for other applications where efficient dust collection is required. Customers can choose between three different power classes, 1.2 kW, 2.4 kW and 3.6 kW, based on their individual requirements. All three models are dust collection H-Class certified and equipped with a cyclone system, a conical pre-filter and reliable H13 HEPA filters. A simple, user-friendly operation is ensured by easily accessible controls, low noise level and the sophisticated Longopac dust bag system. A compact design and lightweight construction allow for trouble-free transport. An additional advantage is the use of non-marking 10-inch wheels, which are construction site proof. Show more Show less
Downloads |
---|
Product flyer PDF 209 kb |
Manual PDF 1.67 mb |
Over 25 years of experience in gear honing make TYROLIT the market and technology leader in its field. Now, more than ever, the MIRA REX product line has made it possible to provide the optimum technical solution for high-efficiency honing. The continuous further development of specifications regarding hardness and cutting ability guarantees maximum honing performance and long dressing cycles.
Downloads |
---|
Product flyer PDF 186 kb |
The DME52UW is a powerful, water-cooled 3-phase drill motor. Its 5.2 kW of power in combination with the oil-bath lubricated gearbox, provide optimum torque and rotation speed for a high drilling performance up to a maximum diameter of 500 mm. Full metal housing, overload clutch and motor thermal protection as well as IP 55 protection class guarantee maximal reliability. LED performance indicator, Softstart and antifriction-element ensure user friendly operation. Show more Show less
Downloads |
---|
Product flyer PDF 178 kb |
Over 25 years of experience in gear honing make TYROLIT the market and technology leader in this field. With the addition of the MIRA REX VTEC to the product range, we have succeeded in developing technically optimised and adapted honing rings for use with the VSD dressing system. The MIRA REX VTEC honing wheels are available in three different specifications: MIRA REX VTEC-20 standard quality MIRA REX VTEC-30 premium quality MIRA REX VTEC-40 high premium quality Show more Show less
Downloads |
---|
Product flyer PDF 193 kb |
CERABOND X flap discs impress with both their performance and longevity. They offer 30% more stock removal compared to their predecessors. This has been achieved by using a new ceramic grit in combination with an innovative bond system. CERABOND X flap discs are the ideal solution for demanding applications on diverse types of steel and stainless steel grades. CERABOND X flap discs are available with a fibre glass or plastic core. The latter has a trimmable shape, which means that the whole disc can be used. Show more Show less
With the MIRA BG product line, TYROLIT offers an optimum solution for grinding bevel gears. More stringent quality requirements make hard finishing by grinding increasingly necessary.
The PREMIUM*** FASTCUT is synonymous with excellent, specific abrasion of material. As a result, you will achieve your goal faster, and the disc will remain easy cutting and abrasive over its entire lifetime. The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding jobs, such as edge grinding and welding. It is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. The additional TOP SIZE coating provides cool grinding. It is also possible to use it on aluminium, to a limited extent. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less
The PREMIUM*** ceramic mounted point set contains all the common mounted points for working on steel, including a roughing stone. The points provide the longest possible lifetime for deburring, bevelling and edging work. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Show more Show less
PREMIUM*** cup brushes with brass wire are ideal for machining nonferrous metals. Due to its hardness, the brass wire achieves the best results on the brass workpiece. Their knotted wire design enables them to easily remove paint, dirt and varnish. They are ideal for fine work and thus make working on nonferrous metals easier. Show more Show less
Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less
Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted cup brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000 delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less
Downloads |
---|
Product flyer PDF 281 kb |
Manual PDF 1.79 mb |
These accessories are suitable for clamping all rough grinding wheels available in the TYROLIT assortment for straight grinders. Please observe the maximum permissible speed.
Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the stone cut-off wheel from TYROLIT offers reduced cutting times coupled with minimal effort. Clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
Downloads |
---|
Product flyer PDF 2.99 mb |
TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT STANDARD** cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less
With the TYROLIT POLISHING PROGRAM you can achieve the perfect high gloss surface in just a few steps. Preventing clogging of the wheels provides an above-average lifetime. Exceptionally cool grinding due to special flaps ensures outstanding surface finishes. Exceptionally high levels of work safety due to low heat build-up, minimal formation of dust and quiet operation. Show more Show less
Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less
The intelligent design of our SCM discs enables them to be used on all the back up pads available in our assortment. The removable centre hole of the SCM disc enables the disc to be fitted to the back up pad in a self-centring position. The discs and back up pads are designed for use on the angle grinder in all common diameters from 115 to 178 mm. Show more Show less
Our back up pads can be used on most dual action sanders and their medium density provides the ideal support for finishing and preparing surfaces. The specially developed product design delivers outstanding dust extraction. You can use practically any disc with our back up pads. They fit discs with 0, 6, 7, 9 and 15 holes. Show more Show less
With TYROLIT QUICK CHANGE DISCS you can save time and increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. Our QUICK CHANGE DISC assortment includes discs for general grinding tasks on any material. Our two different types cover the main mounting systems. Show more Show less
With highly flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends the BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less
With SHIELD tapered brushes, TYROLIT offers a protective plastic coasting against undesired dust and wire breakages, combined with user-friendly use. The transparent protective coating also allows an unrestricted view of the workpiece. This tool is also frequently used to clean welding seams and for light deburring. The tool shape enables easy machining of corners and edges. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on stainless steel. Show more Show less
Over 25 years of experience in gear honing make TYROLIT the market and technology leader in this field. With the new 2-zone composite design MIRA REX COMP range, we have succeeded in developing technically optimised and adapted honing wheels for power honing. . The abrasive inner ring is produced using vitrified bonding. The outer ring is made of an PU bonding without abrasive grains. A patent application was filed for this innovative honing wheel design. Show more Show less
Downloads |
---|
Product flyer PDF 212 kb |
The improved belts with self-sharpening ceramic grain offer a high stock removal rate on steel and stainless steel. Thanks to this self-sharpening effect, an even surface quality is achieved over the entire lifetime of the abrasive belts. Moreover, the composition of the abrasive belt reduces effort for the operator as less pressure is required. Show more Show less
The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted cup brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
The new product line MIRA ALPHA BK was especially developed for grinding large gears. It is a product update to the MIRA ICE BK. With the new ALPHA technology from TYROLIT previously unattained results in terms of economy and cool grinding can be achieved. Show more Show less
Downloads |
---|
Product flyer PDF 236 kb |
The PREMIUM quick-change discs made of aluminum oxide with quick-clamping system are the ideal solution for front applications on small surfaces and in narrow spaces. The mechanical locking of the disc guarantees a secure attachment that cannot loosen or shift during work, enabling quick and easy disc changes. Through the strong adhesion and the high-quality abrasive grain, an excellent lifetime of the product is guaranteed. The quick-change discs are available in two different mounting options, in order to cover various tool types. The grinding disc connects to the threaded nylon pin, which allows quick clamping on the backing pad. Show more Show less
SHIELD tapered brushes offer a protective coating against dust and wire breakages due to their shape, combined with user-friendly use. The transparent protective coating also allows an unrestricted view of the workpiece. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine edges and corners. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. This tool is also frequently used to clean welding seams. Show more Show less
The MIRA ICE product line was developed in collaboration with experienced TYROLIT experts, especially for the grinding of large gears. A new kind of development approach enables previously unknown results to be achieved in terms of economic efficiency and cool grinding. MIRA ICE has been further optimised on the basis of the leading product line from BURKA-KOSMOS and sets new standards throughout the industry.
Downloads |
---|
Product flyer PDF 172 kb |
The PREMIUM*** OVERLAP is the right tool to effortlessly access hard-to-reach areas. Its flaps overlap by about 10 mm and make light work of the finishing of fillet welds, grooves and flutes. The OVERLAP flaps also impress in terms of stock removal rate and lifetime when used on steel and stainless steel. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
With the PREMIUM*** 3in1 rough grinding wheel with zirconium aluminium oxide you can impress on three levels. High performance on steel, stainless steel and cast materials, as well as chemical purity distinguish the product. This tool does not contain iron, sulphur, chlorine and fluorine, and leaves workpiece surfaces in a neutral condition. The abrasiveness and long lifetime enable high stock removal rates within the shortest possible time. Thanks to its chemical purity; free of iron, sulphur, chlorine and fluorine, the wheel is particularly suited to special application areas such as nuclear power stations. Show more Show less
Coordinated light grey bond systems enable the ELASTIC mounted points to be put to both universal use and use tailored to the application. The assortment includes soft elastic points for curved surfaces and medium elastic points for straight surfaces. Our range also includes fewer elastic points for working at higher speeds and mottling points for mottling surfaces. Maximum operating speed: BE13: 16 m/s; BE15: 20 m/s; BE16: 32 m/s. Show more Show less
These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less
Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted round brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000 delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less
Downloads |
---|
Product flyer PDF 289 kb |
Manual PDF 1.79 mb |
The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. This STANDARD** cut-off wheel achieves the best results due to its excellent cutting ability that reduces the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT BASIC* cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less
These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. The grit sizes available in the assortment, from 50 to 3000, ensure a perfect surface finish on the material. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less
Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less
With a semi-open grain distribution on a light paper backing, TYROLIT PREMIUM*** paper sheets are ideally suited to hand sanding or for use on orbital sanders. The semi-open coating of the PREMIUM*** paper sheets prevents loading of the product and delivers an excellent surface finish. Show more Show less
Tyrolit redefines CNC profiling wheels for stone fabrication Tyrolit has revolutionized the production of its CNC profile wheels in order to offer fabricators a boost in performance. Show more Show less
Downloads |
---|
Product flyer PDF 310 kb |
With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. Simple handling and mounting save you time. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Show more Show less
Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less
The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less
Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted round brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less
With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. Simple handling and mounting save you time. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Show more Show less
The ideal core drill entry model. The drill motor and drill rig complement each other perfectly and form a single unit. The preset speed and compact, lightweight construction guarantee easy handling and user-friendliness. An integrated PRCD safety switch ensures maximum safety. Show more Show less
Downloads |
---|
Product flyer PDF 158 kb |
Manual PDF 692 kb |
The DRS250 drilling system combines simplicity with a large drill diameter range. The drill motor and drill rig complement each other and form a single unit. 2-speed oil bath gearbox insures perfect lubrication in all working positions, as well as optimal torque-to-speed ratio. Compact and lightweight construction guarantees easy handling and user-friendliness. Mechanical overload clutch and integrated PRCD safety switch ensure maximum safety. Optional vacuum plate offers more flexibility in fixing the system. Show more Show less
Downloads |
---|
Product flyer PDF 168 kb |
Manual PDF 736 kb |
The combination of a ceramic grain with our unique bond system guarantees lasting abrasiveness and an unrivalled lifetime. The CERABOND X fibre disc is your best choice for fast and convenient working with steel and stainless steel. With CERABOND X you hit your target faster - and this applies to surface grinding, removing welding seams, rust removal and deburring. Show more Show less
Downloads |
---|
Product flyer PDF 295 kb |
With the GENIS 2 product line, TYROLIT defines a new performance level and a wider range of applications for external cylindrical grinding with vitrified-bonded CBN tools. GENIS 2 is characterised by a high-strength bond with excellent moistening properties, which securely binds the CBN grain. Low bond volumes enable very porous, cool-grinding and extremely easy-cutting specifications with a long lifetime. Show more Show less
Downloads |
---|
Product flyer PDF 150 kb |
Following intensive research, TYROLIT has succeeded in developing GENIS - a bond system that ensures optimum wetting and coating of the CBN grain, even with extremely low bond content. By selecting the composition of the bond, at the right firing conditions crystallisation is controlled in a targeted manner. This enables the production of porous textures with high mechanical strength, which feature maximum resistance to the effect of cooling lubricants. The cool grinding specifications of our GENIS highest performance tools enable you to purposely reduce grinding forces and so make the most efficient use of the CBN grain. In all applications, practical experience shows that reduced grinding forces enable minimal wear and maximum profile retention. Show more Show less
Downloads |
---|
Product flyer PDF 1.90 mb |
The PREMIUM*** COMBI combines abrasive cloth and fabric in one tool. This enables two work steps to be performed in one. Material removal and simultaneous finishing of surfaces produce an optimal result. The long lifetime of the PREMIUM*** COMBI dramatically increases economic efficiency in comparison to conventional “surface conditioning” discs. The disc has also been specially developed to achieve good results at high speeds on non-adjustable angle grinders (max. 80 m/s). Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
The high-performance rough grinding wheel has been specially designed for stainless steel applications. The PREMIUM*** INOX rough grinding wheel combines a long lifetime and the best cutting ability. To achieve this a special mixture of regular aluminium oxide and zirconium aluminium oxide is used. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less
The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less
The DRA150 is extremely well-suited for electrical and installation work. This drill rig is suitable for 550 mm drill bits and angle drilling. A centre indicator, spirit level and carrying handle facilitate handling. Show more Show less
Downloads |
---|
Product flyer PDF 148 kb |
Manual PDF 2.08 mb |
The BASIC* cut-off wheel for steel is suitable for cutting profiles, solid material and large cross-sections due to its design with two external reinforcements. With the BASIC* wheel, you can achieve reduced cutting times coupled with minimal effort. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
With the flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less
These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. With the POLISTAR set, you receive 7 pads in grit sizes of 50, 150, 300, 500, 1000, 2000 and 3000, as well as a supporting disc with an M14 mounting. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less
The combination of a ceramic grain with our unique bond system guarantees lasting abrasiveness and an unrivalled lifetime. The CERABOND X fibre disc is your best choice for fast and convenient working with steel and stainless steel. With CERABOND X you hit your target faster - and this applies to surface grinding, removing welding seams, rust removal and deburring. Show more Show less
Downloads |
---|
Product flyer PDF 295 kb |
With the STRIP-IT rough cleaning wheel for the mini angle grinder, you can effortlessly remove rust, paint, lacquer and underbody protection. The porous nylon fibres, enriched with an aggressive abrasive, rise to any challenge. They also prevent the wheel from becoming clogged or smeared. The STRIP-IT material is cut into a wheel shape and bonded to the nylon threaded shaft. The red rough cleaning wheel STRIP-IT made of ceramic corundum (S EX. ROUGH) is harder, more aggressive and harder compared to the standard black version (C ROUGH). This offers the operator quiet, fatigue-free grinding with low heat generation with the disc. Show more Show less
The unitised wheels from TYROLIT are ideally suited to the machining of small surfaces and corners. The soft surface of the product does not alter the surface geometry of your workpiece in any way and always achieves the desired structure. Application areas are primarily the deburring, cleaning, fading, finishing and machining of welding seams. . Compact wheels offer increased safety and especially cool grinding compared to other deburring tools. Show more Show less
With GENIS CF, TYROLIT is extending the performance spectrum of the GENIS product line with an innovative, fibre-reinforced composite core for numerous external cylindrical grinding applications. In addition to a weight reduction of up to 80%, this tool design features special damping characteristics, which result in improved grinding results and a longer lifetime.
Downloads |
---|
Product flyer PDF 213 kb |
The vibration damping developed and patented by TYROLIT allows professional users to achieve exceptionally gentle grinding. The multi-layer structure and the permanently attached plastic flange reduce vibrations by up to 50%. The PREMIUM*** Vibstar technology helps to prevent occupational illnesses, such as muscular and skeletal damage, and neurological illnesses and circulatory problems, such as vibration white finger. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less
The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less
Lightweight under the drill rigs up to Ø 160 mm. The standardised clamping collar system enables quick mounting of common drill motors. In addition, a centre indicator, angle indicator and spirit level enhance user-friendliness and help save valuable time during drill rig set-up. The anchor or vacuum attachment facility also increase flexibility. Show more Show less
Downloads |
---|
Product flyer PDF 166 kb |
Manual PDF 622 kb |
The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. The BASIC* cut-off wheel therefore offers good stability and cutting ability, reducing the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less
The PREMIUM*** Pipeliner brushes were specially developed for quick cleaning of pipe connections made from stainless steel. Pipelines are often subject to demanding requirements and are therefore welded in several steps. Individual welding seams must first be cleaned in order to superimpose additional welding seams. Our pipeline brushes offer you a reliable and durable tool for this type of application. Show more Show less
At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less
Downloads |
---|
Product flyer PDF 7.48 mb |
Our fleece sheets are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less
The PREMIUM*** Silentio sets new milestones in terms of noise reduction. With a reduction of 10 decibels, noise perception is minimised by 50%. This increases the user's level of comfort while working, avoiding lasting physical harm. This rough grinding wheel with a unique wheel shape has been specially designed for stainless steel applications. Show more Show less
Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted wire brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Twisted shaft mounted round brushes are designed for welding and removing scale and paint. Show more Show less
The DRA250 | DRU250 drill rigs offer impressive stability and drilling performance thanks to sturdy workmanship and robust drilling columns with wide gear teeth. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator (DRU250), angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less
Downloads |
---|
Product flyer PDF 229 kb |
Manual PDF 796 kb |
With highly flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less
The BY dual rod drill rig combines a lightweight design with great stability. The accurate guide principle enables inclined drilling at any angle. This particularly compact core drill rig can be combined with a wide range of electric drilling motors. Thanks to its modular design, the drill rig can also be used for more powerful hydraulic drilling operations. Show more Show less
Downloads |
---|
Product flyer PDF 150 kb |
Manual PDF 2.00 mb |
This tool not only offers a cost-efficient solution for your everyday work, but also the safety standards customers have come to expect from Tyrolit. This is provided by the excellent lifetime and stability of the STANDARD** cut-off wheel. The tool is particularly suitable for cutting solid material. The assortment of STANDARD** cut-off wheels for steel ranges from 2.5 to 3.0 mm. It offers a long lifetime and is suitable for universal use. Show more Show less
This high-performance tool has been designed to be used on both steel and stainless steel and its standard widths offer a cost-efficient solution. This is provided by the longest lifetime and stability of the PREMIUM*** 2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less
The combination of high-quality ceramic grains and a unique bonding system prevents premature grain break-out. Therefore, CERABOND X cut-off wheels guarantee an unmatchable lifetime, and their aggressiveness is significantly increased. This makes it the best solution for cutting steel and stainless steel in heavy-duty applications. The CERABOND X range of cut-off wheels is particularly suitable for optimum machining of extremely hard, demanding workpieces (e.g. hardened steel) and large cross-sections. The assortment stands for the longest lifetime and shortest working processes with maximum economic efficiency. Show more Show less
High-performance cut-off wheel for the machining of various cast materials. Suitable for the use on all common angle grinders. The well-known CERABOND X cut-off wheel from Tyrolit has now been specially adapted and optimised for cutting a wide range of cast materials, such as spheroidal cast iron or cast iron with lamellar graphite. The new bond system efficiently prevents premature grain break-out, allowing you to achieve an incredible lifetime on cast materials with CERABOND X cut-off wheels. By using high-quality ceramic abrasive grains, you are guaranteed maximum aggressiveness over the entire lifetime. The high cutting ability of the cut-off wheels allows the operator to work very comfortably with little effort, which makes working with cast iron much easier. Particularly clean cutting surfaces reduce rework and working hours and thus support the most economical working processes. Show more Show less
High-performance cut-off wheel for guided off-hand cutting on rails. Suitable for the use on manual cut-off machines with electric or petrol engines. The new CERABOND X cut-off wheel was specially developed for cutting rails while defying the most adverse operating conditions. The new bond system prevents premature grain breakout, which offers you an incredible lifetime with CERABOND X cut-off wheels. High-quality ceramic abrasive grains guarantee maximum aggressiveness over the entire service life. Even under extreme operating conditions such as humidity, cold and temperature fluctuations, the Tyrolit rail cut-off wheel offers the shortest cutting times with little effort. Particularly clean and bright cutting surfaces reduce reworking and working times and thus support the most economical work processes. Show more Show less
The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency. Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide Show more Show less
With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for the flute grinding of tungsten carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to significantly reduced grinding forces or to a major increase in profile retention. The precision of the machined tools remains at the usual high level.
Downloads |
---|
Product flyer PDF 132 kb |
Easiest drilling of bores in walls, ceiling and floors thanks to intelligent design with drilling and gripping column that can be rotated by 360°. The drill rig can be mounted in a time saving and material protecting manner via an innovative telescope clamping system. Various settings options, an extended drilling column and a variety of drill accessories ensure universal use. Show more Show less
Downloads |
---|
Product flyer PDF 181 kb |
Manual PDF 0.91 mb |
With flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less
At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less
Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel. There is no risk of sharp workpiece edges removing the crown. Show more Show less
The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces. These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel. Show more Show less
With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. TYROLIT has now refined this technology. The wheels now have a thinner width of 2.0 mm and offer additional safety for the user with the new DEEP Cut Protection. The risk of sharp workpiece edges removing the crown from the wheel and the consequent break out of the bore is prevented. Show more Show less
In standard widths, this high-performance tool not only offers a cost-efficient solution, but also the highest safety standards. This is provided by the longest lifetime and stability of the PREMIUM*** LONGLIFE. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of LONGLIFE cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less
The STANDARD** 2-in-1 wheel is suitable for cutting metal sheets, profiles, pipes, rods and solid material and has been designed to be used on both steel and stainless steel. The standard widths offer a cost-efficient solution to your everyday needs excellent lifetime and stability are guaranteed. The STANDARD** cut-off wheels range from 1.0 to 2.0 mm and guarantee quick and easy operation with the longest tool lifetime. Show more Show less
The STANDARD** 2-in-1 wheel is suitable for cutting metal sheets, profiles, pipes, rods and solid material and has been designed to be used on both steel and stainless steel. The standard widths offer a cost-efficient solution to your everyday needs excellent lifetime and stability are guaranteed.
The STANDARD** 2-in-1 wheel is suitable for cutting metal sheets, profiles, pipes, rods and solid material and has been designed to be used on both steel and stainless steel. The standard widths offer a cost-efficient solution to your everyday needs excellent lifetime and stability are guaranteed.
With the STARTEC HP product line, Tyrolit was already able to satisfy performance and quality requirements in the past. The STARTEC XP-P line now offers improved profile retention and low power consumption during the manufacture of tools made of HSS and HM. State-of-the-art raw material combinations and tried and tested production sequences make sure our customers enjoy tools of optimum quality.
Downloads |
---|
Product flyer PDF 180 kb |
DRA400 and DRU400, the professional core drilling systems for a versatile application range. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator, angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less
Downloads |
---|
Product flyer PDF 207 kb |
Manual PDF 904 kb |
The special feature of the PREMIUM*** paper rolls is a latex-finished backing, which makes them ideal for wet and dry applications. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper roll delivers an excellent surface finish. Show more Show less
The BASIC* CUT AND GRIND makes it possible to perform applications, such as grinding, deburring and shaping as well as cutting and plunging, with only one tool. The design of the wheel guarantees good performance right from the start without compromising on safety. While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards Show more Show less
This tool is designed for use on both steel and stainless steel. Our BASIC* cut-off wheel 2in1 has an excellent lifetime and stability. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The 1.6 mm cut-off wheel available in the BASIC* assortment is particularly suitable for fast, convenient and low-burr work. The stable cut-off wheels in thicknesses between 2.0 and 3.0 mm have a very long lifetime and are suitable for universal use. Show more Show less
This tool is designed for use on both steel and stainless steel. Our BASIC* cut-off wheel 2in1 has an excellent lifetime and stability. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.
This tool is designed for use on both steel and stainless steel. Our BASIC* cut-off wheel 2in1 has an excellent lifetime and stability. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.
STARTEC XP-P from TYROLIT is a byword for maximum efficiency and optimum tool quality in flute grinding. The product range will be expanded in future to include new shapes and specifications for machining clearance surfaces and face geometries on tungsten carbide stock-removal tools. An innovative bond system, tailored diamond qualities and new manufacturing technologies guarantee extremely high edge stability, low cutting forces and the best surface finish on the ground tool.
Downloads |
---|
Product flyer PDF 154 kb |
The DRA500, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. Show more Show less
Downloads |
---|
Product flyer PDF 195 kb |
Manual PDF 861 kb |
With a semi-open grain distribution on a light paper backing, TYROLIT PREMIUM*** paper rolls are ideally suited to hand sanding or for use on orbital sanders. The semi-open coating of the PREMIUM*** paper roll prevents loading of the product and delivers an excellent surface finish. Show more Show less
The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of these cut-off wheels ranges from thicknesses of 1.0 to 1.9 mm for fast, convenient and low-burr cutting. The stable cut-off wheels in thicknesses between 2.0 and 2.5 mm have a very long lifetime and are suitable for universal use. Show more Show less
The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting. Show more Show less
The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting. Show more Show less
In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to achieve short cutting times with NF metals too. New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion. Show more Show less
This PREMIUM*** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving clean cutting edges and excellent cutting quality. Machine wear is significantly reduced by low wheel thicknesses. The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste. Show more Show less
With the STARTEC PG-1 product line, for the first time TYROLIT is offering innovative roughing and finishing wheels for the peel grinding of tungsten carbide tool blanks in particular. A high-strength metal bond is used for the roughing wheel. This enables especially cost-effective and reliable process control. Long-life vitrified or metal bonds are used for the finishing wheel. This enables even large stock removal fluctuations to be compensated after roughing, and maximum surface quality to be achieved.
Downloads |
---|
Product flyer PDF 126 kb |
Cost-effective drilling with hydraulic drill and feed motor. The DRA500, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. Show more Show less
Downloads |
---|
Product flyer PDF 209 kb |
Manual PDF 861 kb |
This STANDARD** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on stone materials, the wheel impresses by achieving clean cutting edges and good cutting quality. Reworking is no longer required. Show more Show less
TYROLIT fleece rolls are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less
The BASIC* cut-off wheel reduces the work of the operator due to its good cutting ability. When used on common building materials, the wheel impresses by achieving clean cutting edges and good cutting quality. The BASIC version of the 2.5 to 3.0 mm thick wheels offer a long lifetime and can be used for universal applications. The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste. Show more Show less
FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.
Downloads |
---|
Product flyer PDF 305 kb |
The PREMIUM cut-off wheels CAST offer the highest aggressiveness with the best cutting ability at the same time. An innovative manufacturing technology combined with high-quality zirconia alumina makes this possible. The assortment of these cut-off wheels extends from 3.0 to 3.5 mm. The product is available in three degrees of hardness (R, P, N) to cover all applications. This high-performance tool was developed for use on all casting materials. Show more Show less
Using these accessories you can significantly increase lateral stability. This means more precise cutting and enhanced first-cut performance are achieved. These special accessories are made of tempered tool steel and are suitable for angle grinders with an M14 drive screw. It is recommended for super-thin cut-off wheels in a straight design and a diameter of 178 and 230 mm in particular.
System solutions comprising high-precision grinding tools and specially designed dressing wheels make up the STARTEC MT-1 product line from TYROLIT. Bespoke diamond qualities and an innovative bond structure ensure low grinding forces and particularly high cutting efficiency during the grinding process. Minimal reject-part rates and optimum ground tool quality are the result.
Downloads |
---|
Product flyer PDF 140 kb |
The BC-2 is ideal for drilling large holes up to 1 000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less
Downloads |
---|
Product flyer PDF 245 kb |
Manual PDF 1.44 mb |
Tyrolit is the market and technology leader in the field of high-porosity grinding wheels for creep feed grinding. With the STRATO product line, TYROLIT is setting new standards of quality and performance. It has now launched STRATO-ULTRA, representing the next generation of surface and creep feed grinding tools. Particularly in the turbine industry, STRATO ULTRA can be used instead of grinding tools with expensive sintered aluminium oxides without sacrificing performance. Sintered aluminium oxide reacts very aggressively to the dressing tool and consequently generates increased diamond wear. TYROLIT offers its customers profiled grinding tools. Depending on the profile depth, simple edge profiles and customised pre-profiling can significantly reduce set-up times (pre-profiling times) and associated dressing tool wear. Show more Show less
Downloads |
---|
Product flyer PDF 113 kb |
Cost-effective drilling with hydraulic drill and feed motor. The BC-2 is ideal for drilling large holes up to 1 000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less
Downloads |
---|
Product flyer PDF 212 kb |
Manual PDF 1.44 mb |
Tyrolit's STRATO ALPHA sets a further milestone in the economical production of turbine blades. Thanks to the new ALPHA technology, these vitrified bonded high-performance grinding wheels provide an exceptionally long lifetime, high profile retention and a particularly cool grinding performance. Show more Show less
Downloads |
---|
Product flyer PDF 189 kb |
With VIPER ULTRA, TYROLIT is setting a new benchmark in the field of creep feed grinding. The improved bonding of the grain and precisely controlled wetting enable the patented VIPER ULTRA bond system to coat the surface of the grain and so greatly improve grain bonding.
Downloads |
---|
Product flyer PDF 217 kb |
With the VIPER ALPHA, TYROLIT is setting a further milestone in the economical production of turbine blades. Thanks to the new ALPHA technology, these vitrified bonded high-performance grinding wheels convince with exceptional lifetime, high profile retention and cool grinding. Show more Show less
Downloads |
---|
Product flyer PDF 209 kb |
With its CENTURIA product line, Tyrolit offers a complete range of conventional, resin-bonded tools for surface grinding. Different face grinding methods are used for rational production of functional surfaces with high requirements relating to evenness, plane parallelism and surface finish. Either both faces are machined simultaneously (double side face grinding), or just one face is machined using single wheels, segments, rings or cups. The components are often manufactured in mass production, which means that there are high requirements with respect to process stability. Show more Show less
With the CENTURIA M, and MP product lines, Tyrolit produces special products for the surface grinding of taper rollers. These cup wheels are manufactured in a multi-zone design, so that the pre-grinding and finish grinding can be carried out efficiently in one operation. The coarser inner zone ensures a high stock removal rate, the fine outer zone ensures a very low surface roughness on the flat surface of the taper rollers. Show more Show less
COLUMBIA grinding wheels from TYROLIT bridge the technological gap between grinding tools made of fused aluminium oxide and superabrasives. For internal cylindrical grinding applications, in particular, these products of specially bonded sintered aluminium oxide develop their full potential and make possible previously unparalleled levels of performance.
Downloads |
---|
Product flyer PDF 216 kb |
TYROLIT has developed a new generation of grinding wheels with a CBN layer and an innovative core for grinding rolls used in cold rolling mills. The GENIS ROLL STAR enables the cost-effective machining of ultra-hard rolls thanks to shorter grinding times and higher-quality surface results. The newly developed core of the GENIS ROLL STAR is vibration-damped and can be disposed of once the grinding layer is worn down. Show more Show less
With the CSS Roll Star 2.0, TYROLIT is defining a new level of performance in the grinding of rolls. More than one hundred years of experience in the development of grinding solutions of the highest quality make TYROLIT a valued partner for roll grinding. Thanks to our market-leading know-how in bonding technologies and high quality sintered aluminium oxides the best possible results are achieved in the CSS Roll Star 2.0 product line. Show more Show less
Downloads |
---|
Product flyer PDF 194 kb |
More than one hundred years of experience in development of grinding solutions of the highest quality make TYROLIT to a valued partner in the in roll grinding. In the hot rolling mill TYROLIT Hybrid can boost the already excellent performance once again. Show more Show less
Downloads |
---|
Product flyer PDF 307 kb |
The rolls must be continually reground due to fire cracks, wear and peeling of the roll surface. Roll grinding is a special form of external cylindrical grinding. It is used in sheet mills and in roll production. With the CSS-RS, TYROLIT offers the optimum grinding tool for this application.
Downloads |
---|
Image flyer PDF 2.21 mb |
Our "roll pass" for grinding rod mills is called CSS WIRE ROLL – currently the best solution on the market. It is also a fully integrated system solution, including tools for re-trueing the grinding wheel and roughing stones for exposing the abrasive grain.
With a grinding wheel, regulating wheel and dressing tool, TYROLIT offers the complete range. By continually further developing our products, we can guarantee the best stock removal per grinding pass, the strictest tolerances and finest surfaces.
Through the use of centreless grinding in through-feed and plunge cut grinding, round components can be produced with particular precision and efficiency. Here, the regulating wheel controls the grinding process and therefore has a decisive influence on the quality of the produced components. The CSS REGULATOR from TYROLIT is manufactured as a unitised version. The extremely high compaction ensures uniform quality of the regulating wheel. Show more Show less
Downloads |
---|
Product flyer PDF 150 kb |
With CSS ULTRA, TYROLIT has managed to restructure the micro-architecture of the grinding wheel with lasting effect by using high quality components and innovative sintering technology. This enables the abrasive grain to withstand much greater loads during use without breaking away prematurely. These improvements result in maximum profile retention combined with minimal wear.
Downloads |
---|
Product flyer PDF 144 kb |
Grinding tools specially developed for knife grinding , hollow grinding and back grinding. COOL CUT is suitable for cutting tools of all kinds: forged or stamped kitchen knives and pen knives, scalpels and razor blades, lawn and gardening shears, paper knives.
Downloads |
---|
Product flyer PDF 2.46 mb |
Resin-bonded grinding tools for the grinding, sharpening and polishing of cutting tools, such as scalpels and scissors.
Downloads |
---|
Product flyer PDF 2.46 mb |
"During the grinding process, all the work is performed by the abrasive grain." This central guiding principle has significantly shaped the development of the SKYTEC XD-1.The SKYTEC XD-1 product line impresses through a particularly high proportion of diamond grain, embedded in a specially developed bond. This results in excellent grinding performance and a long tool life. Show more Show less
Downloads |
---|
Product flyer PDF 126 kb |
TYROLIT offers the innovative SKYTEC BASIC+ product line for the economical production of PCD and PCBN cutting inserts. This proven series stands for precision geometry and minimal cutting-edge chipping. A bond system with increased porosity forms the centrepiece of this solution. Show more Show less
Downloads |
---|
Product flyer PDF 122 kb |
The innovative SKYTEC BOLT metal bond was specially developed for the patented Agathon PowerGrind process. Spark erosion enables the grinding wheel to be continuously and simultaneously dressed, sharpened and cleaned during the grinding process. The maximum chipping space and the permanent, easy cutting grinding wheel topography of the SKYTEC BOLT enable tool inserts to be machined with maximum economic efficiency.
Downloads |
---|
Product flyer PDF 280 kb |
The SOLOTEC product line from TYROLIT offers the perfect solution for the peripheral grinding of cutting inserts made from tungsten carbide and cermet. A range of newly developed bond systems with optimised strength and increased brittleness is used. When combined with new diamond qualities, the result is efficient grinding tools that improve the grinding process while simultaneously improving workpiece quality. Show more Show less
Downloads |
---|
Product flyer PDF 133 kb |
Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Laser welded segments up to a Ø 300 mm for maximum safety.
Downloads |
---|
Product flyer PDF 7.63 mb |
Drill motors up to 3,5 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 300 mm for maximum safety.
Downloads |
---|
Product flyer PDF 7.63 mb |
Products on special polyester film are used to create defined surface structures in the automotive and components industry.
For grinding the chip flute, the focus is on precise geometry and optimum hardness of the tool's cutting edge. With tried and tested flute grinding wheels from TYROLIT, these requirements are perfectly satisfied thanks to maximum stock removal rates and cool grinding. The result is significantly lower machining costs and enhanced workpiece quality.
Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-Technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 300 mm for maximum safety.
Drill motors over 3 kW | medium-hard to hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 300 mm for maximum safety.
Honing and superfinishing stones are made from conventional abrasives (aluminium oxide and silicon carbide) as standard. However, Tyrolit also produces these tools using superabrasives (diamond and CBN). Honing and superfinishing is used on components with especially high demands concerning the surface finish and geometry. The demands on the honing and superfinishing stones are also correspondingly high. Show more Show less
Open-pore grinding tools for machining base surfaces. The special feature is the machining of plastic coatings and steel edges in one operation. Grinding wheels also produce a considerably flatter coating surface (base surface) than an abrasive belt.
Drill motors over 3.5 kW. Hard to very hard concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime. Laser-welded segments up to Ø 300 mm for maximum safety.
Grinding tools developed in-house for removing the metal layer from insulation glass. Can also be used for various machine systems, including stationary moving top platen machines and hand-held machines.
Drill motors over 3 kW. Medium-hard to very hard concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime. Laser-welded segments up to Ø 300 mm for maximum safety.
Diamond grinding tools for machining wafers (silicon) in the microchip industry. For an optimum result we recommend grinding tools with diamond in resin and vitrified bonding systems.
Downloads |
---|
Image flyer PDF 817 kb |
Drill motors over 3 kW. Soft to medium-hard concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime, new segment geometry for a high stock removal rate. Laser-welded segments up to Ø 300 mm for maximum safety.
TYROLIT offers a comprehensive range of products for machining ceramic components. These include various application-specific bond systems with optimised performance in conjunction with new diamond qualities.
Downloads |
---|
Product flyer PDF 192 kb |
Drill motors up to 3 kW. Medium-hard to very hard concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime, new segment geometry for a high stock removal rate. Laser-welded segments up to Ø 300 mm for maximum safety.
Grinding tools exclusively with diamond in electroplated bond systems.
Downloads |
---|
Image flyer PDF 817 kb |
Drill motors up to 2.5 kW. Soft concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime, new segment geometry for a high stock removal rate. Laser-welded segments up to Ø 300 mm for maximum safety.
Tyrolit offers diamond grinding tools in special shapes and dimensions for machining hip joints (ceramic materials) and CBN grinding tools in special honing sleeve designs for machining hip joints of steel and alloys.
Downloads |
---|
Product flyer PDF 3.39 mb |
Diamond grinding tools with cushioning plastic core system for machining very hard materials and technical ceramic components. Straight diamond grinding tools in vitrified bond for the machining of ceramic components require special damping, thus VIBSTAR is only available in certain dimensions on request.
We developed our resin-bonded ELASTIC grinding tools specifically for machining steel edges. These are used in a cup wheel version for machining the steel edges on the sides of skis.
Downloads |
---|
Image flyer PDF 2.40 mb |
Elastic-bonded grinding and polishing tools for the machining of precision components. These are mainly used for precision mechanics in the watchmaking, spectacle and jewellery industries. Our ELASTIC grinding tools were adapted for diverse applications and are used in the deburring, effect grinding, fine grinding and polishing of precision components.
Downloads |
---|
Image flyer PDF 2.40 mb |
For the centreless grinding of taper rollers, a steel profiled regulating wheel is used. A certain elasticity of the grinding wheel is required so that the rollers can still be operated safely. The Tyrolit centreless wheel in elastic bond has proven highly effective.
In conjunction with the DME19DP drill motor, the dry drill bits in TGD® technology are the perfect solution for rig-guided dry drilling applications in reinforced concrete.
Downloads |
---|
Product flyer PDF 2.51 mb |
The newly developed PREMIUM dry drill bit for hand-guided drilling impresses in many respects. With TGD®-technology, a unique technology developed by TYROLIT for the optimised distribution of grain.
Fine grinding, removal and pre-polishing of silicon carbide in resinoid bond.
The fastest, longest and lightest TYROLIT dry drill bit for hand-guided applications. The thread form of the steel tubes enables easy removal of the drilling dust via the extraction system. Spiral grooves ensure a noticeable weight reduction. Furthermore, the dry drill bits are specially adapted to core drilling with soft-impact function and therefore in combination with the TYROLIT DME19DP drill motor the perfect solution for hand-guided dry drilling applications with longer life time than the DDL-HH-FAST CUT.
Downloads |
---|
Product flyer PDF 2.51 mb |
The fastest, longest and lightest TYROLIT dry drill bit for hand-guided applications. The thread form of the steel tubes enables easy removal of the drilling dust via the extraction system. Spiral grooves ensure a noticeable weight reduction. Furthermore, the dry drill bits are specially adapted to core drilling with soft-impact function and therefore in combination with the TYROLIT DME19DP drill motor the perfect solution for hand-guided dry drilling applications.
Downloads |
---|
Product flyer PDF 2.51 mb |
Elastic grinding tools in resinoid bond.
Downloads |
---|
Image flyer PDF 817 kb |
The newly developed PREMIUM dry drill bit for hand-guided drilling impresses in many respects. With TGD®-Technology (TYROLIT GRAIN DISTRIBUTION), a unique technology developed by TYROLIT for the optimised distrubtion of grain.
Downloads |
---|
Product flyer PDF 2.51 mb |
Perfect tool for installing sockets and junction boxes as well as smaller breakthrough jobs.
Downloads |
---|
Product flyer PDF 2.51 mb |
Quality tool for daily use, impressive performance and lifetime.
Downloads |
---|
Product flyer PDF 2.51 mb |
Machining of ceramic insert cups in wet grinding (oil).
Downloads |
---|
Image flyer PDF 3.62 mb |
Tool for installing sockets and junction boxes as well as smaller breakthrough jobs.
Downloads |
---|
Product flyer PDF 2.51 mb |
Machining of steel hip joints in wet grinding using honing sleeves.
Downloads |
---|
Image flyer PDF 3.62 mb |
TYROLIT vacuum brazed diamond coring bit for all ceramic tiles, fine stoneware and marble slabs. Maximum drilling comfort, suitable for universal use with M14 connection for angle grinders, and adapter for drilling machines. Suitable for dry and wet drilling. Perfect, chip-free drilling in tiled and sanitary areas.
Downloads |
---|
Product flyer PDF 7.63 mb |
Resin-bonded grinding tools for the pointing of hypodermic needles.
Downloads |
---|
Image flyer PDF 3.62 mb |